
JQH Series Air Fow Mixer
Air mixer is mainly used in chemical products, plastics, pharmaceuticals, battery materials, food, feed, cement, earth and stone, ceramic raw materials and other industries. It is a non-destructive particle and powder mixing equipment, it has no leakage, no dead Angle, no pollution, sealed mixed environmental protection characteristics. Low maintenance cost, fast mixing speed, especially suitable for fast and uniform mixing of large quantities of materials.
The treated oil-free and water-free high pressure air is sprayed from N upper nozzles in the form of pulses from the bottom of the air mixer. The high-speed impact force generated by the compressed air instantly causes the powder and particulate matter in the tank to spiral flow along the wall of the cylinder with the compressed air and reach the fluidized boiling mixing state. After several pulse strikes and pause intervals, The injection time is very short and the consumption of very little compressed air can be fully mixed and quickly homogenized.
The loading, conveying, mixing and post-processing of raw materials can only be controlled by the combination of touch screen and PLC to form a complete set of intelligent unattended automatic production line.

Technological Process
1. Feeding system 2. Air flow mixer
- 01 Adapt to Ultrafine PowdersSuitable for ultrafine powder, it has the effect of dispersing and depolymerization on false agglomeration.
- 02 Stir Evenly and QuicklyFast mixing speed, high uniformity, multi-point sampling, accurate control, single batch mixing only 4-10f minutes.
- 03 High Mixing AccuracyHigh mixing accuracy, single batch, one time can be mixed 1-100m³.
- 04 Easy to CleanNo dead corners, no residue. Pulse cleaning is convenient, no cross contamination.
- 05 No Dust PollutionMicro negative pressure operation, no dust pollution.
- 06 Low CostLow energy consumption, low cost, unit energy consumption is only 30-50% of mechanical mixing.
- 07 Easy ShuttleIntelligent and automatic. One-click operation unmanned operation.
- 08 RiskNo mechanical parts, no lubricating oil leakage risk, no friction, no heat.
Model | Full volume | load factor | mixing time | Silo diameter | Silo height | Operating Pressure |
JQH-1 | 1m³ |
0.4-0.6 |
3-10min | 900mm | 1800mm |
0.5-0.8mpa |
JQH-2 | 2m³ | 1100mm | 2200mm | |||
JQH-3 | 3m³ | 1250mm | 2800mm | |||
JQH-5 | 5m³ | 1500mm | 4200mm | |||
JQH-6 | 6m³ | 1600mm | 4500mm | |||
JQF-8 | 8m³ | 2200mm | 4800mm | |||
JQH-10 | 10m³ | 2380mm | 5600mm | |||
JQH-15 | 15m³ | 2700mm | 6200mm | |||
JQH-20 | 20m³ | 2800mm | 6400mm | |||
JQH-30 | 30m³ | 3000mm | 7200mm | |||
JQH-40 | 40m³ | 3250mm | 8400mm | |||
JQH-50 | 50m³ | 3400mm | 9000mm | |||
JQH-60 | 60m³ | 3500mm | 9600mm | |||
JQH-80 | 80m³ | 3800mm | 10000mm | |||
JQH-100 | 100m³ | 4000mm | 11800mm |
- Book an experiment
- Logistics and transportation
- Host Smash
- Instrument detection
- Experimental analysis
- Configuration selection
-
Xinjiang a high-tech material Co., LTD
Material Name:Boron carbideDischarge fineness:d50:2.5um -
A company in Jiangsu
Material Name:Lithium Iron PhosphateDischarge fineness:D50:1μm -
A company in Sichuan Province
Material Name:Silicon carbon negative electrodeDischarge fineness:15μm -
A company in Jiangxi
Material Name:Medical calcium carbonateDischarge fineness:D90:14μm -
A company in Zhejiang
Material Name:Calcium carbonateDischarge fineness:D90:14μm -
A company in Yichang
Material Name:erythromycinDischarge fineness:1000 mesh